Primer 106
Primer for Bitumen Materials
Cat. no. 106
Product Description
Primer 106 is a solution composed of a blown, hard and flexible bitumen mixture with selected hydrocarbon solvents. Primer 106 does not contain water or water dissolvent materials. Primer 106 dries quickly.
Uses
Primer 106 is used as foundation coating for bitumen coatings. Primer 106 binding to humid surface areas permits to use this material as foundation paint for humid concrete surfaces.
Technical Specifications |
|
|
Appearance: |
Black shiny liquid |
|
Specific Weight : |
0.9 gr./ ml |
|
Water Contents : |
No water |
|
Viscosity at 25 ºC seconds (CPS) : |
25 - 60 |
|
Residue after refining (by volume): |
35 minimum |
|
Penetration at 25 ºC at 100 gr. weight 5 seconds (at 0.1 mm.) : |
20 - 50 |
|
Materials dissolving in trichloroethylene : |
99 % minimum |
Application
Before using Primer 106, the surface to be treated should be thoroughly cleaned of any rust, grease and debris. Use spraying or paintbrush to apply the primer. Primer 106 is ready for use with paintbrush. For spraying, it should be diluted with mineral turpentine (up to 5 %, according to need).
Coating Capacity
3 – 5 m² per 1 kg for painting over concrete
4 – 10 m² per 1 kg for painting over iron.
Product Consumption
200 – 300 grams per 1 square meter.
Drying time
1 to 3 hours, subject to weather conditions and coating thickness.
Packaging
180 kg, 15 kg
4.5 liters, 1 liter.
Safety precautions: |
The instructions that appear on the product are based on knowledge and experience amassed over the years. We reserve the right to change these instructions without prior notification. The operator is responsible for keeping informed of the latest updates. These instructions are solely recommendations and do not constitute liability for the product. Prior to use, the user must check the product’s suitability, and the application and environmental conditions that meet his specifications. If in doubt, please contact us and we will be happy to instruct you. |